How to use the buoy oxygen inhaler: Add distilled water to the humidification cup. The water level in the bottle should not be higher than the upper water line, but it should not be lower than the lower water line. Do not use saline instead. /. Screw the large nut of the inhaler onto the outlet connector of the oxygen cylinder valve, so that the pressure gauge and flow meter are vertically upward. /3. Before supplying oxygen, first insert the oxygen inhalation tube into the oxygen delivery connector, then turn the flow adjustment switch counterclockwise to turn on the origin, so that the float ball rises slowly (the scale line aligned with the upper surface of the float ball is the flow reading, the unit is liter/ ), the oxygen supply can be adjusted as needed. /. During the oxygen supply process of the inhaler, if the water in the inhaler bottle is lower than the water line, the flow adjustment switch should be closed in time, unscrew the humidification bottle, add distilled water according to the requirements of this item, and then screw on Inhaler bottle, continue to supply oxygen. /. When the inhaler is stopped being used, the air source of the inhaler should be turned off. If it needs to be removed, hold the inhaler with your hands and remove it (the unlocking method of different oxygen supply terminal sockets will be explained by the engineering and installation unit), and then go to Remove the water from the bottle, clean and disinfect it, and store it in a corrosion-free and well-ventilated room).
Oxygen inhaler buoy oxygen inhaler inhaler Xi'an buoy oxygen inhaler Xi'an pressure gauge manufacturer